Stackable Glass Food Storage Containers-manufacture,factory,supplier from China

The maintenance methods of mini excavators mainly include the following aspects:1. Storage and management of lubricating grease: Lubricating grease should be stored in a dry, ventilated place, away from dust and sand particles. Incorrect storage methods may shorten the lifespan of the machine and increase production costs. ‌2. Regularly change the engine oil and filter: It is recommended to change the engine oil and filter every 500 hours or once a month to ensure smooth engine operation and extend the service life of the excavator. ‌3.

Daily maintenance1. Batteries should be regularly refilled with distilled water (pure water).2. If electric forklifts are not used for a long time, the battery should be fully charged and stored. And keep charging at a frequency of about 1-2 months apart.3. When working in multiple shifts, motor-driven storage forklifts require backup batteries (in continuous operation, battery power consumption is fast and the battery loss is relatively large).4.

Electric forklifts use electric energy as a power source, do not produce exhaust emissions, have no pollution to the environment, and meet current environmental requirements.

Excavators have independent off-road chassis and powerful engines, which can stably travel on uneven construction roads and adapt to various complex terrains.

The excavator is designed to be able to operate flexibly in narrow spaces and adapt to various complex terrains and construction sites.

Excavators can easily adjust the angle, height, and depth during operation, with flexibility and adaptability. In addition, excavators can easily coordinate any terrain and topography, making them suitable for operations in various terrain conditions.Excavators have fast operating speed, high efficiency, and low time consumption.

Excavators can adapt to various complex terrains and working environments, such as mountains, hills, plains, swamps, etc.

Tractors can quickly and efficiently complete a series of agricultural production tasks such as plowing, sowing, fertilizing, and harvesting, greatly shortening the growth cycle of crops and increasing the yield per unit area.

The structure design of the excavator is reasonable, with a low center of gravity and good stability, which can maintain a stable working state even on uneven ground or slopes.

The excavator uses advanced technology and design, such as the use of internal buffer plates, to ensure the structural strength and performance of the extended arm, reduce the occurrence of safety accidents, and improve the safety of construction.Maximum digging depth2150mmOperating Weight2tonMachine width1170mmEngine speed2200rpmCrawler length1500mmEngineLaidong KM385Minimum swing radius1450mmRated Power20kwDigging height2950mmOverall Machine Dimensions2400*1150*2200mm

The composition and principle of mini excavators mainly involve two aspects: their basic structure and working principle. ‌In terms of basic structure, the basic structure of a mini excavator includes a bucket, bulldozer shovel, connecting rod, oil cylinder, engine, hydraulic pump, motor, boom, boom oil cylinder, track, guide wheel, idler wheel, support wheel, boom, drive wheel, counterweight, and other parts. These components work together to enable mini excavators to perform tasks such as excavation, loading, and transportation.

Small excavators are typically used for the following purposes:1. Construction site: used for excavating soil, cleaning the ground, excavating foundation pits, transporting building materials, etc.2. Farmland work: used for construction of irrigation channels, land preparation, excavation of drainage ditches and other agricultural work.3. Road construction: used for road construction work such as excavating roadbeds, cleaning road slopes, and laying pipelines.4. Landscape greening: used for digging plant pits, organizing flower beds, cleaning branches and leaves, and other landscaping work.5.

Excavator pilot control technology is a control technology for large-scale construction machinery. Its basic principle is to use distance sensors, angle sensors, etc. to achieve real-time monitoring and control of the motion trajectory of each component of the excavator.

Definition and specification range of small excavatorsSmall excavators usually refer to the smaller type of excavator loader, with a specification range of approximately 1 to 6 tons, of which 2.7 to 3 tons of products are more common. This excavator, due to its compact size, has become an ideal equipment for earthwork applications in urban areas.

The real advantage of a small excavator lies in its ecology.

The cab design of the excavator is reasonable, with a wide field of view, and the layout of the operating handle and buttons is reasonable, making it easy for the driver to operate.

The excavator adopts advanced hydraulic transmission system and power device, which can achieve fast and efficient excavation operations. Its powerful excavation power and efficient operation efficiency can significantly shorten the project cycle and reduce construction costs.

Diesel forklifts have good operability and flexibility, and can adapt to different work scenarios and needs. The cab design of diesel forklifts conforms to ergonomic requirements, providing a comfortable driving environment and reducing driver fatigue.Weight3100kgFront tire28*9-15Rear tire650-10Ground clearance170mmStandard fork1070mmDimensions without forks2900*1380*2200mmTiresstandard pneumatic tiresMinimum turning radius2400mm

Diesel forklifts are suitable for various complex operating environments, such as outdoors, workshops, warehouses, etc. They can maintain good working performance under different terrain and climate conditions, meeting various transportation needs.

Excavators are usually made of high-quality materials and advanced manufacturing processes, with good durability and reliability.

The power provided by diesel engines is relatively high, allowing diesel forklifts to maintain stable performance even under heavy loads and harsh environments. The acceleration performance of diesel forklifts is stable, especially under heavy loads, with better acceleration abilityWeight3100kgFront tire28*9-15Rear tire650-10Ground clearance170mmStandard fork1070mmDimensions without forks2900*1380*2200mmTiresstandard pneumatic tiresMinimum turning radius2400mm

The operation of electric forklifts is relatively simple, and does not require complicated gear shifting and clutch operations.The forward, backward, lifting and lowering movements can be achieved simply by controlling the handle, making it easier for operators to get started and improving work efficiency.Chassis Width930mmOperating Weight1.2tonTotal Track Length1090mmBucket Capacity0.02m3Total Width180mmEngineKOOP192Total Height1700mmRated Power12hpMax Digging Radius2900mmOverall Machine Dimensions2200*930*1700mmMini excavators can be equipped with many different attachments, such as cru

Electric forklifts, as a type of mechanical equipment used for transporting and stacking goods, play an important role in various industries and scenarios. Here are some of the main functions of electric forklifts:Freight handling: Electric forklifts can be used to transport various types and sizes of goods, such as raw materials, finished products, semi-finished products, etc.

Mini Excavator NT-12PRO 1.2 Ton EPA Engine. The excavator is designed with the characteristics of one machine with multiple functions. It can quickly connect various machines at the end of the dipper arm to perform various operations such as digging, lifting, crushing, drilling, logging, and snatching.