Factory Wholesale Mini Electric 2Ton Forklift For Sale

matters needing attention

During the charging and discharging process of a battery, the water in the electrolyte will gradually decrease due to electrolysis and evaporation, resulting in a decrease in the electrolyte level. If not replenished in a timely manner, it may shorten the service life of the battery, and distilled water should be replenished in a timely manner. Never use drinking purified water as a substitute, as purified water contains various trace elements that can have adverse effects on batteries.

When adding electrolyte or water to the battery, it is important to note that the electrolyte should be 10-15 millimeters higher than the electrode plate; For batteries with two red lines, the electrolyte must not exceed the upper red line. If the electrolyte is too full, it will overflow from the small hole in the battery cover. Once it flows between the positive and negative poles of the battery, it will form a self discharge circuit. In this case, the electrolyte should be wiped off or rinsed with boiling water to clean.

If something accidentally falls into the electrolyte during addition, do not use metal objects to remove it. Use a wooden stick to clamp out impurities; If iron or copper wire is used for fishing, metal molecules will enter the battery under the corrosion of sulfuric acid, forming self discharge and damaging the battery.

If the vehicle stops running for more than 20 days, the negative wire of the battery should be removed to avoid leakage accidents